In the center, orange cable means multimode fiber and the beige connector indicates 62.5/125 fiber. On the right, the yellow patchcord indicates singlemode fiber and the blue connector means it is a regular PC polished connector, If it were an APC connector, it would be green.

• Fiber Cable Slitters.
• Fiber Cleavers.
• Fiber Crimp Tools.
• Fiber Cutters & Scissors.
• Fiber Midspan Access Tools.
• Fiber Optic Scribes.
• Fiber Optic Strippers.
• Insertion/Extraction Tools.

To perform fiber optic splicing, you need some basic tools and equipment, such as fiber strippers, cleavers, cleaners, splicers, and protection sleeves. Fiber strippers remove the outer coating and buffer from the fiber, exposing the glass core and cladding.

A visual fault locator (VFL) is a compact and portable tool used by fiber optic technicians to quickly and effectively identify faults, breaks, bends, or other discontinuities in fiber optic cables.

To remove damaged fiber optic cabling, you want to cut it out using the right tool. A fiber optic cutter can do this, and it will minimize additional damage to the fibers when cutting.

The tool used for stripping the fiber cable is called a cable jacket stripper. This tool is specifically designed to remove the outer protective layer, also known as the jacket, of the fiber optic cable. The cable jacket stripper is an essential tool in the field of fiber optic installation and maintenance.

Fiber optic test tool kit is used to inspect fiber optic equipments during the production or for trouble shooting. Fiber optic termination kit is used for fiber termination and contains tools those used to strip, prep, terminate, crimp, polish and inspect fiber optic cable connectors.

An optical time-domain reflectometer (OTDR) is an optoelectronic instrument used to characterize an optical fiber. It is the optical equivalent of an electronic time domain reflectometer which measures the impedance of the cable or transmission line under test.

Fibre optic splice protectors are used to repair broken glass fibre wires and to create new connections, from glass fibre to glass fibre. The connection is made by the inner tube, which shrinks when heated. View our range of heat shrinkable fibre optic splice protectors here.

For example, if the project involves insulation, chemical resistance, and a wide operating temperature range, polyolefin heat shrink may be a better choice. If the project involves flexibility, ease of use, and abrasion resistance, PVC heat shrink may be a better choice.

In general, heat shrink tubing is a common element in most electrical setups that insulates electrical components from external factors such as moisture, dust, abrasion, and sharp objects that might otherwise damage wires and electrical components. This type of damage ultimately results in shorts and failures.

Splice trays are designed to hold individual or mass fusion spliced fibers. These trays are typically installed within fiber optic enclosures and patch panels. They're compact, lightweight, and available with a variety of splice holding chips and cover options.

A suspension clamp is a fitting that is designed for suspending or hanging cables or conductors to the pole. In other cases, the clamp can suspend cables to the tower. Since the cable is directly connected to the conductor, its specifications need to match with that of the cable so as to create a perfect connection.

A fiber optic cable clamp, also known as a cable management clamp, is a mechanical device designed to secure and support fiber optic cables. It serves two primary purposes: holding the cables firmly in place and protecting them from external stresses such as vibrations, tension, and bending.